Jumla Punching Plate Composite Sintered Wire Mesh Water Tace Mai ƙera Kuma Mai Bayarwa |Sinotech

Punching Plate Composite Sintered Wire Mesh Water Tace Fitar Hoton

Takaitaccen Bayani:

Punching plated sintered ragakunshi Punching farantin da Multi-Layer bakin karfe waya raga, ta yin amfani da high matsa lamba injin makera sintered tare, don haka daidai cewa sun cimma ganiya hade da kwanciyar hankali, high matsa lamba da inji ƙarfi, tace fineness, kwarara kudi da backwashing Properties.Ana amfani da shi musamman a cikin manyan matsi da matsananciyar yanayin aiki.

Aika mana imel

Cikakken Bayani

Tags samfurin

Tsarin

Kayayyaki

DIN 1.4404/AISI 316L, DIN 1.4539/AISI 904L

Monel, Inconel, Duples karfe, Hastelloy gami

Sauran kayan da ake samu akan buƙata.

Fitar tace: 1 -200 microns

Girman

500mmx1000mm,1000mmx1000mm

600mmx1200mm,1200mmx1200mm

1200mmx1500mm,1500mmx2000mm

Sauran girman akwai akan buƙata.

Ƙayyadaddun bayanai

Ƙayyadewa - Buga farantin sintered waya raga
Bayani	tace lafiya	Tsarin	Kauri	Porosity
Bayani	μm	Tsarin	mm	%
Saukewa: SSM-P-1.5T	2-100	60+ tace Layer+60+30+Φ4x5px1.0T	1.5	57
SSM-P-2.0T	2-100	30+ tace Layer+30+Φ5x7px1.5T	2	50
Saukewa: SSM-P-2.5T	20-100	60+ tace Layer+60+30+Φ4x5px1.5T	2.5	35
SSM-P-3.0T	2-200	60+ tace Layer+60+20+Φ6x8px2.0T	3	35
SSM-P-4.0T	2-200	30+ tace Layer+30+20+Φ8x10px2.5T	4	50
SSM-P-5.0T	2-200	30+ tace Layer+30+20+16+10+Φ8x10px3.0T	5	55
SSM-P-6.0T	2-250	30+ tace Layer+30+20+16+10+Φ8x10px4.0T	6	50
SSM-P-7.0T	2-250	30+ tace Layer+30+20+16+10+Φ8x10px5.0T	7	50
SSM-P-8.0T	2-250	30+ tace Layer+30+20+16+10+Φ8x10px6.0T	8	50
Za'a iya daidaita kauri na farantin bugawa da tsarin ragar waya bisa ga buƙatun mai amfani.

Jawabin, idan ana amfani da shi a Multifunctional tace wash bushes, tsarin farantin tace zai iya zama daidaitaccen Layer biyar da farantin naushi tare.

Wannan shine Layer 100+ tacewa+100+12/64+64/12+4.0T(ko Na sauran farantin kauri)

Kaurin farantin naushi kuma ya dogara da buƙatar matsa lamba.

Wannan samfurin ya dace don yanayin matsanancin matsin lamba ko buƙatar buƙatun baya na matsin lamba, yadda ya kamata ya magance ci gaba da samar da masana'antar magunguna da sinadarai da wankin kan layi, buƙatun samar da bakararre.

Aikace-aikace

Abinci & abin sha, maganin ruwa, cire ƙura, kantin magani, sinadarai, polymer, da sauransu.

Perforated farantin sintered raga sabon nau'in tace kayan da aka hada da wani misali abu (bakin karfe 304 ko 316L) perforated farantin da dama yadudduka na square rami raga (ko m raga).Za a iya zabar farantin naushi da kauri daban-daban bisa ga buƙatu, kuma tarun saƙa na fili na iya zama yadudduka ɗaya ko fiye.Saboda farantin naushi azaman tallafi, haɗakar ragamar tana da ƙarfin matsawa da ƙarfin injina.Sintirin biyun ba wai kawai yana da kyakyawan iskar iska na ragar da aka saka a fili ba, har ma yana da ƙarfin injin farantin karfe.Ana iya sarrafa shi cikin silindrical, diski, takarda da matattarar mazugi, ana amfani da su sosai a cikin jiyya na ruwa, abin sha, abinci, ƙarfe, sinadarai da masana'antar harhada magunguna, da sauransu.

Rarrashin farantin da aka yi da shi ana yin shi ta hanyar sanya kwarangwal mai jure matsi da ragamar tacewa cikin jiki, don haka yana da halaye masu zuwa:

(1) Kyakkyawan rigidity da ƙarfin injiniya mai girma.Saboda goyon bayan farantin naushi, yana da mafi girman ƙarfin injina da ƙarfin matsawa tsakanin ragar raƙuman ruwa;

(2) Babban madaidaicin tacewa, kewayon madaidaicin madaidaicin 1u-100u, kuma yana da ingantaccen aikin tacewa;

(3) Sauƙaƙe don tsaftacewa, ana ɗaukar tacewa ta sama, musamman dacewa da wankin baya;

(4) Ba a saurin lalacewa, siffar ragar tana daidaitawa, girman ratar daidai ne, kuma babu rami makaho.(5) Juriya na lalata, juriya mai girma, yana iya jure yanayin zafi na 480 ° C.